+86-755-8231-4520 info@cbpumps.com

CB Type DG Boiler Feed Pump

DG pump is a single-suction, multi-stage, segmental centrifugal clean water pump, suitable for medium and low pressure boiler feed water, factory, and urban high-lift water delivery. It is used to transport clean water or liquids with physical and chemical properties similar to clean water. The medium temperature is -20℃~105℃ (except DG85-80 and 200DG43, the medium temperature of these two pumps is -20℃-150℃). The pump inlet pressure shall not exceed 0.59 MPa (6 kgf/cm²).

The suction port and discharge port of the pump are both vertically upward, and the axial force of the rotor is balanced by the balance disk. The shaft seal can be a packing seal or a mechanical seal. The rotor support is only used for DG85-80, DG85-67, and DG155-67 with sliding bearings and thin oil lubrication, while other pumps use rolling bearings.EMAC will continue to update the product introduction pages of different standard versions of pumps. Please subscribe to our website to get the latest update information.

If you are in need of pumps model that not available on our website for the moment, please contact EMAC sales team for technical details and related documents, our well trained sales and engineering team will help you with all products and techical documents available here at CB Pumps.

Ebara XBD-FS Fire Pump Video

coming soon

coming soon

coming soon

General Specifications of DG Series

Flow range:6~346 m³/h
Head range:102~105 m

DG Model Description

  • DG25-50×3
  • DG single suction, multi-stage boiler feed pump
  • 25-flow rate (m³/h)
  • 50-pump single-stage head (m)
  • 3-number of pump stages
  • 400G, 40×3
  • 40 pump inlet diameter (mm)
  • DG single suction, multi-stage boiler feed pump
  • 40 pump single-stage head (m)
  • 3-number of pump stages

Click Kit Name to Check Part List

ParameterType

Capacity
Q		Head
H		Speed
N		Shaft power
Pa		Motor Eff.
η		NPSH
r		impolier
Dia		Pump diameterweight
powerTypeInlet DiaOutlet Dia
m³/hL/smr/minkWkW%mmmmmmmkg
40DGr40×36
10
12		1.7
2.8
3.3		123
120
115.5		29805.82
7.11
7.7		11Y160M₁-234.5
46
49		2.6
3.3
3.9		1704040125
40DGi40×46
10
12		1.7
2.8
3.3		164
160
154		29807.76
9.48
10.28		15Y160M₂-234.5
46
49		2.6
3.3
3.9		1704040145
40DG140×56
10
12		1.7
2.8
3.3		205
200
192.5		29809.7
11.85
12.85		18.5Y160L-234.5
46
49		2.6
3.3
3.9		1704040165
40DG40×66
10
12		1.7
2.8
3.3		246
240
231		298011.64
14.62
15.42		18.5Y160L-234.5
46
49		2.6
3.3
3.9		1704040185
40DG₁40×76
10
12		1.7
2.8
3.3		287
280
269.5		298013.58
16.59
17.99		22Y180M-234.5
46
49		2.6
3.3
3.9		1704040205
40DG40×86
10
12		1.7
2.8
3.3		328
320
308		298015.52
18.96
20.56		22Y180M-234.5
46
49		2.6
3.3
3.9		1704040225
40DGr40×96
10
12		1.7
2.8
3.3		369
360
346.5		298017.46
21.33
23.13		30Y200L₁-234.5
46
49		2.6
3.3
3.9		1704040245
40DGi40×106
10
12		1.7
2.8
3.3		410
400
385		298019.4
23.7
25.7		30Y200L₁-234.5
46
49		2.6
3.3
3.9		1704040265
——END——

ParameterType

Capacity
Q		Head
H		Speed
N		Shaft power
Pa		Motor Eff.
η		NPSH
r		impolier
Dia		Pump diameterweight
powerTypeInlet DiaOutlet Dia
m³/hL/smr/minkWkW%mmmmmmmkg
DG25-50×315
25
28		4.1
6.9
7.8		154.5
150
144		298014.3
18.9
20.3		30Y200L₁-244
54
54		2.4
2.7
2.8		1968080270
DG25-50×415
25
28		4.1
6.9
7.8		206
200
192		298019.1
25.2
27.1		37Y200L₂-244
54
54		2.4
2.7
2.8		1968080295
DG25-50×515
25
28		4.1
6.9
7.8		257.5
250
240		298023.9
31.5
33.9		37Y200L₂-244
54
54		2.4
2.7
2.8		1968080315
DG25-50×615
25
28		4.1
6.9
7.8		309
300
288		298028.6
37.8
40.7		45Y225M-244
54
54		2.4
2.7
2.8		1968080340
DG25-50×715
25
28		4.1
6.9
7.8		360.5
350
336		298033.4
44.1
47.5		55Y250M-244
54
54		2.4
2.7
2.8		1968080360
DG25-50×815
25
28		4.1
6.9
7.8		412
400
384		298038.2
50.4
54.2		75Y280S-244
54
54		2.4
2.7
2.8		1968080385
DG25-50×915
25
28		4.1
6.9
7.8		463.5
450
432		298043
56.7
61		75Y280S-244
54
54		2.4
2.7
2.8		1968080405
DG25-50×1015
25
28		4.1
6.9
7.8		515
500
480		298047.7
63
67.8		75Y280S-244
54
54		2.4
2.7
2.8		1968080430
DG25-50×1115
25
28		4.1
6.9
7.8		566
550
528		298052.5
69.3
74.6		90Y280M-244
54
54		2.4
2.7
2.8		1968080450
DG25-50×1215
25
28		4.1
6.9
7.8		618
600
576		298057.3
75.6
81.4		110Y315S-244
54
54		2.4
2.7
2.8		1968080475
DG80-30×326
43
48		7.2
11.9
13.3		102
90
83.4		298012
15
15.8		18.5Y160L-260
70
69		3
3.9
4.3		1628080150
DG80-30×426
43
48		7.2
11.9
13.3		136
120
111.2		298016
20
21		22Y180M-260
70
69		3
3.9
4.3		1628080165
DG80-30×526
43
48		7.2
11.9
13.3		170
150
139		298020
25
26.3		30Y200L₁-260
70
69		3
3.9
4.3		1628080180
DG80-30×626
43
48		7.2
11.9
13.3		204
180
166.8		298024
30
31.5		37Y200L₂-260
70
69		3
3.9
4.3		1628080195
DG80-30×726
43
48		7.2
11.9
13.3		238
210
194.6		298028
35
36.8		45Y225M-260
70
69		3
3.9
4.3		1628080210
DG80-30×826
43
48		7.2
11.9
13.3		272
240
222.4		298032
40
42		55Y250M-260
70
69		3
3.9
4.3		1628080225
DG80-30×926
43
48		7.2
11.9
13.3		306
270
250.2		298036
45
47.3		55Y250M-260
70
69		3
3.9
4.3		1628080240
DG80-30×1026
43
48		7.2
11.9
13.3		340
300
278		298040
50
52.5		75Y280S-260
70
69		3
3.9
4.3		1628080255
DG46-50×328
46
50		7.8
12.8
13.9		172.5
150
144		298024.8
29.9
31		37Y200L₂-253
63
63.2		2.5
2.8
3		2088080270
DG46-50×428
46
50		7.8
12.8
13.9		230
200
192		298033.1
39.8
41.3		55Y250M-253
63
63.2		2.5
2.8
3		2088080295
DG46-50×528
46
50		7.8
12.8
13.9		287.2
250
240		298041.4
49.8
51.6		75Y280S-253
63
63.2		2.5
2.8
3		2088080315
DG46-50×628
46
50		7.8
12.8
13.9		345
300
288		298049.6
56.7
61.9		75Y280S-253
63
63.2		2.5
2.8
3		2088080340
DG46-50×728
46
50		7.8
12.8
13.9		402.5
350
336		298057.9
69.7
72.2		90Y280M-253
63
63.2		2.5
2.8
3		2088080360
DG46-50×828
46
50		7.8
12.8
13.9		460
400
384		298066.2
79.6
82.6		90Y280M-253
63
63.2		2.5
2.8
3		2088080385
DG46-50×928
46
50		7.8
12.8
13.9		517.5
450
43		298074.4
89.6
92.9		110Y315S-253
63
63.2		2.5
2.8
3		2088080405
DG46-50×1028
46
50		7.8
12.8
13.9		575
500
480		298082.7
99.5
103.5		132Y315M₁-253
63
63.2		2.5
2.8
3		2088080430
DG46-50×1128
46
50		7.8
12.8
13.9		632.5
550
528		298091
109
113.5		132Y315M₁-253
63
63.2		2.5
2.8
3		2088080450
DG46-50×1228
46
50		7.8
12.8
13.9		690
600
576		298099.3
119.4
123.9		160Y315L₁-253
63
63.2		2.5
2.8
3		2088080475
80DG20×232.4
50.4
65.2		9
14
18.1		43.2
40
34.2		14806.28
7.84
9.13		11Y160M-460.7
70
66.5		2.2
2.5
2.8		2558065340
80DG20×332.4
50.4
65.2		9
14
18.1		64.8
60
51.3		14809.42
11.8
13.7		15Y160L-460.7
70
66.5		2.2
2.5
2.8		2558065402
80DG20×432.4
50.4
65.2		9
14
18.1		86.4
80
68.4		148012.6
15.7
18.3		22Y180L-460.7
70
66.5		2.2
2.5
2.8		2558065464
80DG20×532.4
50.4
65.2		9
14
18.1		108
100
85.5		148015.7
19.6
22.8		30Y200L-460.7
70
66.5		2.2
2.5
2.8		2558065526
80DG20×632.4
50.4
65.2		9
14
18.1		129.6
120
102.6		148018.8
23.5
27.4		30Y200L-460.7
70
66.5		2.2
2.5
2.8		2558065588
80DG20×732.4
50.4
65.2		9
14
18.1		151
140
120		148021.9
27.5
32		37Y225S-460.7
70
66.5		2.2
2.5
2.8		2558065650
80DG20×832.4
50.4
65.2		9
14
18.1		173
160
137		148025.1
31.4
36.6		45Y225M-460.7
70
66.5		2.2
2.5
2.8		2558065712
80DG20×932.4
50.4
65.2		9
14
18.1		194
180
154		148028.2
35.3
41.4		45Y225M-460.7
70
66.5		2.2
2.5
2.8		2558065774
80DG20×1032.4
50.4
65.2		9
14
18.1		216
200
171		148031.4
39.2
45.6		55Y250M-460.7
70
66.5		2.2
2.5
2.8		2558065836
——END——

ParameterType

Capacity
Q		Head
H		Speed
N		Shaft power
Pa		Motor Eff.
η		NPSH
r		impolier
Dia		Pump diameterweight
powerTypeInlet DiaOutlet Dia
m³/hL/smr/minkWkW%mmmmmmmkg
DG85-80×554
85
108		15
23.6
30		440
400
350		2980122
142
156		185Y315M-253
65
66		4.5
4.4
5.3		2501001001420
DG85-80×654
85
108		15
23.6
30		528
480
420		2980147
171
187		200Y315M-253
65
66		4.5
4.4
5.3		2501001001490
DG85-80×754
85
108		15
23.6
30		616
560
490		2980171
199
218		250Y355-253
65
66		4.5
4.4
5.3		2501001001570
DG85-80×854
85
108		15
23.6
30		704
640
560		2980195
228
250		280Y355-253
65
66		4.5
4.4
5.3		2501001001640
DG85-80×954
85
108		15
23.6
30		792
720
630		2980220
256
281		315Y355-253
65
66		4.5
4.4
5.3		2501001001710
DG85-80×1054
85
108		15
23.6
30		880
800
700		2980244
285
312		355Y355-253
65
66		4.5
4.4
5.3		2501001001790
DG85-80X1154
85
108		15
23.6
30		968
880
770		2980269
313
343		400Y355-253
65
66		4.5
4.4
5.3		2501001001860
DG85-80X1254
85
108		15
23.6
30		1056
960
840		2980293
342
374		450Y400-253
65
66		4.5
4.4
5.3		2501001001930
00DG20×272
100
126		20
27.8
35		43.4
40
34		148013.1
15.1
16.7		22Y180L-465
72
70		2.8
3.5
4.4		26710080350
100DG20×372
100
126		20
27.8
35		65.1
60
51		148019.6
22.7
25		30Y200L-465
72
70		2.8
3.5
4.4		26710080413
100DG20×472
100
126		20
27.8
35		86.8
80
68		148026.2
30.3
33.3		37Y225S-465
72
70		2.8
3.5
4.4		26710080476
00DG20×572
100
126		20
27.8
35		109
100
85		148032.9
37.9
41.7		45Y225M-465
72
70		2.8
3.5
4.4		26710080539
100DG20×672
100
126		20
27.8
35		130
120
102		148039.3
45.4
50		55Y250M-465
72
70		2.8
3.5
4.4		26710080602
100DG20×772
100
126		20
27.8
35		152
140
119		148045.9
53
58.4		75Y280S-465
72
70		2.8
3.5
4.4		26710080665
00DG20×872
100
126		20
27.8
35		174
160
136		148052.5
60.5
66.7		75Y280S-465
72
70		2.8
3.5
4.4		26710080728
00DG20×972
100
126		20
27.8
35		195
180
153		148058.8
68.1
75		90Y280M-465
72
70		2.8
3.5
4.4		26710080791
100DG20×1072
100
126		20
27.8
35		217
200
170		148065.5
75.6
83.3		90Y280M-465
72
70		2.8
3.5
4.4		26710080854
——END——

ParameterType

Capacity
Q		Head
H		Speed
N		Shaft power
Pa		Motor Eff.
η		NPSH
r		impolier
Dia		Pump diameterweight
powerTypeInlet DiaOutlet Dia
m³/hL/smr/minkWkW%mmmmmmmkg
DG85-67×355
85
100		15.3
23.6
27.8		222
201
183		298061.5
71.5
76.6		90Y280M-254
65
65		3.3
4
4.4		235150150846
DG85-67×455
85
100		15.3
23.6
27.8		296
268
244		298082.1
95.4
102.2		110Y315S-254
65
65		3.3
4
4.4		235150150964
DG85-67×555
85
100		15.3
23.6
27.8		370
335
305		2980102.5
119.3
127.7		160Y315L₁-254
65
65		3.3
4
4.4		2351501501126
DG85-67×655
85
100		15.3
23.6
27.8		444
402
365		2980123.1
143.1
152.8		160Y315M₂-254
65
65		3.3
4
4.4		2351501501434
DG85-67×755
85
100		15.3
23.6
27.8		518
469
427		2980143.6
166.9
178.8		185Y315SB-254
65
65		3.3
4
4.4		2351501501556
DG85-67×855
85
100		15.3
23.6
27.8		592
536
488		2980164.1
190.8
204.3		220Y315M1B-254
65
65		3.3
4
4.4		2351501501624
DG85-67×955
85
100		15.3
23.6
27.8		666
603
549		2980184.6
214.6
229.9		250Y315M₂-254
65
65		3.3
4
4.4		2351501501840
DG155-67×395
155
185		26.3
43
51.3		228
201
177		298093.6
114.7
122.1		132Y315M₁-263
74
73		2.6
4.5
5.7		235150150952
DG155-67×495
155
185		26.3
43
51.3		304
268
236		2980124.8
152.9
162.8		185Y315M-263
74
73		2.6
4.5
5.7		2351501501024
DG155-67×595
155
185		26.3
43
51.3		380
335
295		2980156
191.1
203.6		220Y315M-263
74
73		2.6
4.5
5.7		2351501501145
DG155-67×695
155
185		26.3
43
51.3		456
402
354		2980187.2
229.3
244.3		280Y355M₂-263
74
73		2.6
4.5
5.7		2351501501435
DG155-67×795
155
185		26.3
43
51.3		532
469
413		2980218.4
267.6
285		315Y355M₃-263
74
73		2.6
4.5
5.7		2351501501558
DG155-67×895
155
185		26.3
43
51.3		608
536
472		2980249.6
305.8
325.7		355Y355L₁-263
74
73		2.6
4.5
5.7		2351501501700
DG155-67×995
155
185		26.3
43
51.3		684
603
531		2980280.8
344
366.4		450Y400-263
74
73		2.6
4.5
5.7		2351501501860
50DG30×3119
155
190		33
43
52.7		98.1
92.1
84		148043
50.5
58		75Y280S-474
77
75		2.8
3.5
4.7		305150150570
150DG30×4119
155
190		33
43
52.7		130.8
122.8
112		148057.1
67.3
77.3		90Y280M-474
77
75		2.8
3.5
4.7		305150150640
150DG30×5119
155
190		33
43
52.7		163.5
152.5
140		148071.6
83.6
96.6		110Y315S-474
77
75		2.8
3.5
4.7		305150150700
150DG30×6119
155
190		33
43
52.7		196.2
184.2
168		148085.9
101
116		132Y315M-474
77
75		2.8
3.5
4.7		305150150780
150DG30×7119
155
190		33
43
52.7		228.9
214.9
196		1480100.3
118
135.2		160Y315M-474
77
75		2.8
3.5
4.7		305150150850
150DG30×8119
155
190		33
43
52.7		261.6
245.6
224		1480114.6
134.7
154.6		200Y355M-474
77
75		2.8
3.5
4.7		305150150920
150DG30×9119
155
190		33
43
52.7		294.3
276.3
252		1480128.9
151.5
173.9		200Y355M-474
77
75		2.8
3.5
4.7		305150150990
50DG30×10119
155
190		33
43
52.7		327
307
280		1480143.2
168.3
193.2		220Y355M-474
77
75		2.8
3.5
4.7		3051501501060
——END——

ParameterType

Capacity
Q		Head
H		Speed
N		Shaft power
Pa		Motor Eff.
η		NPSH
r		impolier
Dia		Pump diameterweight
powerTypeInlet DiaOutlet Dia
m³/hL/smr/minkWkW%mmmmmmmkg
DG280-43×3190
288
346		52.8
80
96.1		135.9
122.4
111		148096.9
120
132.9		160Y315L₁-473
80
78		3.0
4.7
6.0		360200200865
DG280-43×4190
288
346		52.8
80
96.1		181.2
163.2
148		1480129.2
160
177.2		200Y315L₂-473
80
78		3.0
4.7
6.0		360200200977
DG280-43×5190
288
346		52.8
80
96.1		226.5
204
185		1480161.5
200
221.5		250Y355-473
80
78		3.0
4.7
6.0		3602002001097
DG280-43×6190
288
346		52.8
80
96.1		271.8
244.8
222		1480193.8
240
265.8		315Y3556-473
80
78		3.0
4.7
6.0		3602002001218
DG280-43×7190
288
346		52.8
80
96.1		317.1
285.6
259		1480226.1
280
310.1		355Y400-473
80
78		3.0
4.7
6.0		3602002001339
DG280-43×8190
288
346		52.8
80
96.1		362.4
326.4
296		1480258.4
320
354.4		450Y400-473
80
78		3.0
4.7
6.0		3602002001459
DG280-43×9190
288
346		52.8
80
96.1		407.7
367.2
333		1480290.7
360
398.7		450Y400-473
80
78		3.0
4.7
6.0		3602002001580
200DG43×3190
288
346		52.8
80
96.1		135.9
122.4
111		148096.9
120
132.9		160Y315L₁-473
80
78		3.0
4.7
6.0		3602002001400
200DG43×4190
288
346		52.8
80
96.1		181.2
163.2
148		1480129.2
160
177.2		200Y315L₂-473
80
78		3.0
4.7
6.0		3602002001510
200DG43×5190
288
346		52.8
80
96.1		226.5
204
185		1480161.5
200
221.5		250Y355-473
80
78		3.0
4.7
6.0		3602002001620
200DG43×6190
288
346		52.8
80
96.1		271.8
244.8
222		1480193.8
240
265.8		315Y355-473
80
78		3.0
4.7
6.0		3602002001730
200DG43×7190
288
346		52.8
80
96.1		317.1
285.6
259		1480226.1
280
310.1		355Y400-473
80
78		3.0
4.7
6.0		3602002001840
200DG43×8190
288
346		52.8
80
96.1		362.4
326.4
296		1480258.4
320
354.4		450Y400-473
80
78		3.0
4.7
6.0		3602002001950
200DG43×9190
288
346		52.8
80
96.1		407.7
367.2
333		1480290.7
360
398.7		450Y400-473
80
78		3.0
4.7
6.0		3602002002100
——END——

Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.

Global Activity

Attending a Global Maritime Extravaganza, SinoMac will be showcasing at Marintec China 2025

Attending a Global Maritime Extravaganza, SinoMac will be showcasing at Marintec China 2025

|

Marintec China 2025, hailed as a "global trendsetter for the maritime industry," will be held from December 2nd to 5th, 2025, at the Shanghai New International Expo Centre. The theme of this year's exhibition is "Innovation and Cooperation for Sustainable Development of the Maritime Industry," and the theme of the High-Level Maritime Forum is "Intelligent Navigation, Green Coexistence, Integration, and Innovation," reflecting expectations for the industry's future.

Review SAUDI RAIL 2025 SinoMac Exhibition Highlights

Review SAUDI RAIL 2025 ：SinoMac Exhibition Highlights

|

SinoMac successfully participated in SAUDI RAIL 2025, the annual industry event held in Riyadh, Saudi Arabia, from October 19th to 20th, 2025. At the exhibition, SinoMac showcased its strong capabilities in railway technology, innovative solutions, and full lifecycle services, and engaged in in-depth exchanges with industry partners, customers, and experts from around the world to jointly explore future opportunities for rail transit development in the Middle East.

SinoMac-Exhibition-Highlights-Review-1

Deeply Cultivate the International Market, Empowering the Future of Rail ——Focus [PRO//Motion Expo 2025]: SinoMac Exhibition Highlights Review

|

From August 28 to 31, 2025, the highly anticipated PRO//Motion Expo 2025 (Russian International Railway and Motion Exhibition) grandly opened at the Russian Railway Museum in St. Petersburg. PRO//Motion Expo is currently the largest railway and transportation exhibition in Russia and the Commonwealth of Independent States (CIS), attracting extensive participation from railway companies from CIS countries and around the world. Over the four-day exhibition, exhibitors showcased cutting-edge technologies and innovative achievements in the railway transportation industry.

Focus on marine industry event, start a new chapter of marine development together--SinoGen Power Technology Limited to exhibit at Marine

Focus on marine industry event, start a new chapter of marine development together–SinoGen Power Technology Limited to exhibit at Marine & Offshore Vietnam 2025

|

Against the backdrop of the booming development of the global shipping and maritime industry, Vietnam International Maritime Expo 2025 (Marine & Offshore Vietnam) will be held in Ho Chi Minh City, Vietnam from 19th to 21st November. As one of the most influential maritime events in Southeast Asia, this exhibition brings together top enterprises and innovations in the fields of global shipbuilding, offshore engineering, port equipment, new energy ship technology, etc., and provides an international platform for industry colleagues to exchange and co-operate and explore the market.

SinoGen Power Technology Limited made its debut at the 2025 Indonesia International Construction Machinery, Mining and Concrete Exhibition

SinoGen Power Technology Limited made its debut at the 2025 Indonesia International Construction Machinery, Mining and Concrete Exhibition

|

The International Exhibition of Engineering Machinery, Mining, and Concrete (Mining Indonesia) will be held in Jakarta, Indonesia, from September 17 to 20, 2025. As one of the most influential mining exhibitions in Southeast Asia, Mining Indonesia provides a professional platform for enterprises, experts, and practitioners in the global mining sector to showcase cutting-edge technologies, exchange industry insights, and explore collaborative opportunities.

2025 Russian International Railway and Rail Transit Exhibition_ SinoGen invites you to join the industry feast

2025 Russian International Railway and Rail Transit Exhibition: SinoGen invites you to join the industry feast

|

From August 28 to 31, 2025, the highly anticipated biennial Russian International Railway and Rail Transit Exhibition (PRO/Motion Expo) will be held in St. Petersburg. The exhibition is the largest and most professional railway and transportation exhibition in Eastern Europe and Central Asia. PRO/Motion Expo brings together industry elites, corporate representatives and professional visitors from all over the world to witness the latest development achievements and cutting-edge trends in the railway and rail transit industry. Here, many internationally renowned companies will showcase their latest technologies, products and solutions, covering railway infrastructure construction, train manufacturing, communication and signal systems, intelligent transportation and other fields. From advanced train design and manufacturing technology to efficient railway operation and management solutions; from innovative rail material research and development to intelligent railway communication and control systems, various cutting-edge technologies and innovative achievements will be presented one by one, bringing a wonderful industry feast to the participants.

Sinogen-actively-participated-in-the-International-Railway-and-Rail-Transit-Exhibition-in-Berlin-Germany-to-explore-the-new-future-of-the-industry

Sinogen actively participated in the International Railway and Rail Transit Exhibition in Berlin, Germany, to explore the new future of the industry

|

From September 22 to 25, 2026, the highly anticipated biennial Berlin International Railway and Rail Transit Exhibition (InnoTrans Berlin) opened grandly in Berlin, Germany. As the largest and most influential event in the global railway and rail transit field, InnoTrans Berlin brings together industry elites, corporate representatives and professional visitors from all over the world to witness the latest development achievements and cutting-edge trends in the railway and rail transit industry. The exhibition covers a number of key areas such as bridges and tunnels, public transportation, and comprehensively displays innovative technologies, advanced equipment and comprehensive solutions in the railway and rail transit industry. From infrastructure construction to operation management, from vehicle manufacturing to intelligent system applications, the exhibition content is rich and diverse, providing participants inside and outside the industry with an excellent platform for a comprehensive understanding of industry dynamics, exchanges and cooperation.

SinoGen-Company-participated-in-the-Saudi-International-Railway-and-National-Highway-Transportation-Exhibition-to-explore-new-opportunities-in-the-industry

SinoGen Company participated in the Saudi International Railway and National Highway Transportation Exhibition to explore new opportunities in the industry

|

The highly anticipated Middle East Saudi International Railway and National Road Transportation Exhibition (SAUDI RAIL) will be grandly opened in Riyadh, the capital of Saudi Arabia, from October 19 to 20, 2025. As an annual event in the field of rail transportation in the region, this exhibition focuses on Saudi Arabia's grand blueprint for rebuilding the future new city. With its strong industry influence and extensive market radiation, it has attracted many industry elites and enterprises to participate actively. The market heat continues to rise, showing a booming development trend.

SinoMac-SinoGen Makes a Brilliant Appearance at Eurasia Rail Turkey 2025

SinoMac-SinoGen Makes a Brilliant Appearance at Eurasia Rail Turkey 2025

|

From June 18 to 20, 2025, the highly anticipated 2025 Turkey Railway, Rolling Stock and Logistics Exhibition (Eurasia Rail Turkey) opened grandly at the Istanbul Expo Center (IFM). As one of the most influential industry events in the railway and rail transit fields in the Middle East, Africa and Europe, this exhibition attracted many outstanding companies from the global rail transit, rolling stock and logistics technology fields to participate in the exhibition. During the three-day exhibition, the exhibitors concentrated on displaying the industry's cutting-edge technologies and innovative achievements, building an efficient technical exchange and business cooperation platform for international professionals, and providing an important opportunity to promote the development of the global rail transit industry.

2025-Kazakhstan-International-Mining6

2025 Kazakhstan International Mining

|

The 2025 Kazakhstan International Mining, Exploration and Coal Processing Exhibition (Mining Week) is set to take place grandly in Karaganda, Kazakhstan, from June 24 to 26. As one of the most influential mining exhibitions in Central Asia, Mining Week provides a professional platform for enterprises, experts, and practitioners in the global mining sector to highlight innovative technologies, exchange industry experiences, and explore cooperation opportunities.SinoGen Power Technology Limited (SinoMac) will participate in this mining event with its mining division, MineMac, bringing an elevated level of enthusiasm and firm determination.

WhatsApp Online logo

Sales Team

Construction-ConeMacWhatApp-Icon

Pump-PumpMacWhatApp-Icon

Mining-MinMacWhatApp-Icon

Generator-SinoGenWhatApp-Icon

EV System-EVMacWhatApp-Icon

Parts-PartMacWhatApp-Icon

Service Team

Sales Manager-Mrs.Wendy FuWhatApp-Icon

Sales Director-Mr.Jasper Lee WhatApp-Icon

Shipping ServiceWhatApp-Icon

Contact EMAC Now!